Alcohol fat 12 (coalescent) Description: Features and use a grease 12- alcohol coalescent is a significant effect of special additives to reduce latex paint film formation temperature, significant improvement in film. performance, improve the film gloss, strength and chalking resistance, improve leveling product index Appearance colorless transparent liquid Chroma ---- ---- ≤5. (platinum - cobalt value) product purity - --- ≥98% (of total fatty alcohols WT%) Acid value ---- ≤0.005% (mgkoh / g) Flash point ---- 120 ℃ Industry: Other alcohols First, the performance of this product is non-toxic environmentally friendly characteristics, to reduce VOC paint effect is remarkable. As efficient coalescent various water emulsion and dispersion coatings in gloss and semi-gloss paint is particularly effective. It is a special emulsion polymerization aid and a solvent paint, to impart the best latex coalescence performance. It is vinyl acetate, acrylic resin, styrene - acrylic resin, and other strong solvent of the polymer, the water-soluble small, less than the water evaporation rate, to ensure that it is completely absorbed latex particles, forming a coating film excellent in continuous, whereby paint gives the best coalescence and color development, but also has good storage stability. The product is a high boiling point, good compatibility, moderate evaporation rate, excellent coalescing and coupling capacity, to improve the coating film leveling, gloss, fullness significant effect. This product can dissolve hydrophobic compounds, water-soluble compounds can dissolve, it is "universal solvent," said. As green coalescent, the product has been optimized in the paint, it can be an effective coalescence, softening, fusion emulsion particles, the emulsion of the film forming temperature is greatly reduced, in favor of the construction of latex paint application. In addition, the product is added to the paint, not only has a certain wet dispersion, can also improve the uniformity and stability of the pigment in paint, varnish for scrub resistance, freeze-thaw stability, adhesion, mechanical strength there is a certain role in the promotion. Technical parameters solubility parameter: 10.5 Flash point: 127 ℃ Appearance: colorless, transparent liquid with a pleasant aroma of sweet gas Second, the product uses a) is widely used in architectural coatings, automotive coatings and high-grade automotive refinish coatings, electrophoretic coating, shipping container coatings , coatings, coil and coil coatings. 2) for the ink, paint strippers, adhesives, insulating materials, cleaning agents. 3) textile, printing and dyeing environmental carrier solvent. Third, the use (application refers to paint) 1) The amount of the product mainly depends on the hardness of the emulsion, hard to be relatively soft emulsion was added to achieve the same amount of film-forming effect. 2) Under normal circumstances, the dosage of 4-6% acrylic emulsion, acrylic emulsion vinegar dosage for 3-5%, 4-6% for styrene-acrylic generally. When the temperature is higher than the bottom as far as the case may be with the right amount to pay more. 3) The product can be added at any stage of paints, if they can join in two, more fully play its role. Adding 1/2 volume during the grinding process, which enhances wetting and dispersing pigments and fillers, add 1/2 of the amount of paint stage, helps to inhibit bubble. Fourth, note 1) The product must be stored in a cool, dry, well-ventilated warehouse; to prevent the sun and rain; must remain closed and properly sealed drums or containers filled with product; and away from oxidizing agents.