Odor coalescent AH-12 First, the performance of this product is the main component esters, properties with non-toxic environmentally friendly, VOC coatings to reduce the effect is significant. As efficient coalescent various water emulsion and dispersion coatings in gloss and semi-gloss paint is particularly effective. It is vinyl acetate, acrylic resin, styrene - acrylic resin, and other strong solvent of the polymer, the small water-soluble, lower than the evaporation rate of water, latex particles is easily absorbed, the formation of a continuous coating film excellent, thereby imparting latex The best paint coalescence and color development, but also has good storage stability. The product is a high boiling point, good compatibility, moderate evaporation rate, excellent coalescing and coupling capacity, to improve the coating film leveling, gloss, fullness significant effect. In addition, the product is added to the paint, not only has a certain wet dispersion, can also improve the uniformity and stability of the pigment in paint, varnish for scrub resistance, freeze-thaw stability, adhesion, mechanical strength There are certain role. Technical parameters Appearance colorless transparent liquid purity ≥99.4 moisture content,% ≤0.01 density (20 ℃) ??1.191-1.195 Refractive index (20 ℃) ??1.515-1.517 Acidity (mg KOH / g) ≤0.05 Second, the product uses a ) is widely used in architectural coatings, high-grade automotive refinish coatings and automotive coatings, electrophoretic coating, shipping container coatings, wood coatings, coil and coil coatings. 2) for the ink, paint strippers, adhesives, insulating materials, cleaning agents. 3) textile, printing and dyeing environmental carrier solvent. Third, the use (application refers to paint) 1) The amount of the product mainly depends on the hardness of the emulsion, hard to be relatively soft emulsion was added to achieve the same amount of film-forming effect. 2) Under normal circumstances, the dosage of 3-5% acrylic emulsion, acrylic emulsion vinegar dosage for 2-4% for styrene-acrylic emulsion is generally 4-6%. Such as the use of lower temperatures can be with the right amount to pay more, according to circumstances. 3) The product can be added at any stage of paints, if they can join in two, more fully play its role. Adding 1/2 volume during the grinding process, which enhances wetting and dispersing pigments and fillers, add 1/2 of the amount of paint stage, helps to inhibit bubble. Fourth, note 1) The product must be stored in a cool, dry, well-ventilated warehouse, to prevent the sun and rain; the product must be equipped with buckets or containers properly closed and sealed, away from oxidizing agents. 2) The product should avoid contact with the eyes, wounds, skin, mucous membranes or exposed, if accidental contact, wash with soap and water. Ingestion or rinse invalid, please get medical attention immediately. V. Packaging 200KG NW large barrels, small barrels 50KG NW